Technical Support

The surface properties of the ceramic seal ring can be made full use of the surface characteristics of the ceramic material, which is the same as the surface of the metal material. Although the surfac...

There are some misunderstandings about the maintenance of pump seals. 1. The greater the spring compression is, the better the sealing effect is. In fact, the volume of the spring is too large, which ...

According to statistics, about 80% to 95% of the leakage of mechanical seals is caused by sealing faces and friction pairs. Flygt pump seals has this problem. In addition to keeping the sealing surfac...

The installation of ptfe mechanical seals need to pay attention to these points.1. The radial runout of the rotating shaft of the equipment should be less than 0.04 mm, and the axial momentum is not a...

(PTFE) oil seal is one seal of ptfe mechanical seal. It has the following advantages compared to the rubber oil seal.1.Rubber oil seal with a spring pressed tip mouth, the width of the contact with th...

Fluorine rubber seals have excellent properties of high temperature resistance, oil resistance, vacuum resistance, acid and alkali resistance, and are widely used in various industries. At present, th...

The rubber in rubber seal factory are made as different kinds of seals for special sealing effects.First, NBR sealing ring. It is suitable for oil, glycol, two ester lubricating oil, gasoline, water, ...

First, material advantages: polytetrafluoroethylene (PTFE), also known as Teflon / Teflon or plastic King (F4), is a copolymer of tetrafluoroethylene monomer, which has the following advantages;1. che...